Every year hundreds of homeowners are affected by an issue with their bathtubs. A leak in the bathtub can be unnoticed for months, leading to severe water destruction to your flooring, walls, and ceilings.
A water leak in your bathtub could cause significant damage to your house when it’s not fixed swiftly. It is not only challenging, but it can also be expensive.
This article will provide the top 10 most frequently occurring bathtub leaks and their step-by-step repair guides. Following these guidelines, you can repair your bathtub leak within a few minutes!
5 Reasons Why a Bathtub Leaks and the Best Ways to Fix It
There are many places where the bathtub could cause leaks, and everyone needs a unique solution. The most frequent leaks in bathtubs are:
1: Leaking Bathtub Faucet
Pressure in the water is the primary cause of a leaky bath faucet. If the pressure in your tap is excessively high, it could cause the seals of your faucet to break and leak eventually.
How Do You Fix a Bathtub Faucet That Leaks After Being Turned Off?
To repair a leaky bathtub faucet, you’ll have to replace the seals of the faucet. It is a simple task that gets done using some essential tools. How you can do it:
- Switch off the tap in your bathtub.
- Remove the faucet’s handle.
- To remove the screws holding the seal in place, use a screwdriver.
- Remove the old seal, then swap it out with a fresh one.
- Screw the new seal into the appropriate position.
- Reattach the handle to the faucet.
- Switch on your water supply in the tub and look for leaks.
2: Leaking Bathtub Drain
If your drain is dripping, a broken pipe or a worn-out gasket is likely to blame. A worn-out gasket could leak water in the area around your drainpipe. It is best to change the gasket to repair the leak.
How can a bathtub’s overflow drain be fixed?
You will need to replace the gasket that seals the drain. To return a leaky gasket for your drain, you’ll have to remove the cover that covers your gutter from the bathtub. After removing the drain cover, you can access the gasket and replace it. The steps are as follows:
- Remove the screws that keep the drainage cover in the correct position.
- Dispose of the used gasket, then replace it with a fresh one.
- Attach the screws that hold the cover for drains in place.
- Check the bathtub for leaks. Fill your tub with water.
3: Leaking Bathtub Pipes
If your bathtub leaches through your pipes, this could be due to a drain or water line pipes breaking. A damaged pipe could leak water and possibly damage the space beneath the tub.
How Can You Repair a Bathtub Drain Line Leak?
If you’ve got a damaged pipe, you’ll have to replace the entire portion of the line. We advise contacting a qualified plumber who can provide drain and water line repair services because this is a more complex repair process.
4: Bathtub Cracks
If your bathtub is leaky due to cracks, it will likely be damaged, repaired, or replaced. We don’t recommend fixing a damaged bathtub because it could be risky. If you’ve cracked your bathtub, we suggest replacing the whole tub. If you need an entirely new bathtub, call us now!
If you’re not sure if your bathtub leaks due to the crack, try these suggestions:
- Put a dry white cloth in the water below the crack you suspect.
- Fill the tub with at least 2 inches of water.
- Keep an eye on your cloth for 30 minutes.
- A crack in your bathtub needs to be fixed or replaced if the water soaks through the towel.
- If the cloth isn’t wet, your tub will not leak, and you can use the tub.
5: Bathtub Grouting Issues
One of the main reasons for leaks in the wall is broken or loose grout. If the grout around your tub starts to degrade and deteriorate, it may leak water.
It’s possible that the grout in your bathtub has broken and has to be changed if water is dripping grouting. You will need to pull out the old grout and put new grout in its place to repair any broken, missing, or outdated grout.
How Can Bathtub Tile Grout Be Replaced?
- To replace grout, you’ll have to remove the previously used grout.
- Use a utility knife or a grout cutter to remove the old grout between tiles.
- After the old grout has to get removed, you can apply the new grout. We suggest using silicone grout for the best results.
- Smooth the grout in place using your fingers, and then let it dry.
- Once the grout has dried, you can put on a sealant to guard your grout against water-based damage.
There are a few standard bathtub leaks as well as solutions. Examine it for any cracks, holes, or leaks and fix them as soon as possible. If you’ve successfully fixed the problem, it would be best to avoid it from happening again by regularly keeping your bathtub.
Conclusion
It’s challenging to deal with the potential for leakage. However, if you follow the instructions in this article, you’ll be able to identify and fix that bathtub leak. If you still have difficulty fixing your bathtub leaks, contact an experienced plumber. They will assist you in locating the leak’s origin and performing a quick and efficient repair. If you live in Ottawa and need a reliable and professional plumber, we at Ottawa Plumbing Service, call us at (613) 317-1682 and email us at info@ottawaplumbingservice.com, ready to help 24/7. We provide a broad range of plumbing services for bathrooms.
