Your kitchen faucet’s handle gets turned on, but the water keeps running when you try to stop it. Are you experiencing this?
There are 3 main reasons the faucet won’t shut off:
- The handle on your faucet has been stripped and must get replaced
- Your handle’s stem requires an upgrade to the washer
- Your handle’s seat must get replaced
Each of these issues is relatively simple to fix. However, they’ll require the proper tools and expertise. However, first, we need to stop the water flow from your faucet. We’ll explore these three problems in greater detail and show you how to repair these issues.
The steps below should get followed to switch off your water:
- Look below your faucet by opening the cabinet under your sink.
- There should be two valves to the ceiling. They should get turned in the OFF position, and the water should stop flowing.
Let’s examine why the kitchen faucet isn’t turning off and how to solve it.
Why Your Kitchen Sink Faucet Won’t Close
Problem 1: The Faucet’s Handle Gets Stripped
If you turn the handle, do you notice that it turns without ever getting into a place?
That indicates that the handle on your faucet gets stripped. Tiny threads connecting the stems and handles allow you to turn the handle. These threads could corrode and peel out over time, rendering your handle useless for controlling water flow.
Solution:
You’ll need to take the handle off and replace it in most situations. Replace both handles simultaneously, so you don’t have to fret over the second one breaking earlier. In certain instances, it may be necessary to purchase another stem, too.
You must get a plumber for assistance to remove the handle and check it for worn threads because removing the faucet’s many holds needs a lot of effort.
Problem 2: The Stem of Your Handle Requires an Upgrade to the Washer
The stem of your faucet uses washers to distribute the pressure of the screw so that it doesn’t get looser as time passes. But, if the branch isn’t lubricated, the washer may be damaged or cracked, which means you cannot stop the water flow.
Solution:
Get a plumber to take off your handle. Then, inspect the stem to ensure it’s appropriately lubricated and has a working washer.
Problem 3: Your Handle Seat Has to Get Replaced
A faucet handle is a tiny piece of a seat that helps make the handle turn. As time passes, your handle’s stems wear and tear due to regular usage.
Solution:
Speaking with an expert plumber to repair or, at the very least, smooth out your handle’s seat is recommended.
Does My Faucet Need to Be Repaired or Replaced?
Here’s our advice If your faucet appears to be relatively new and only has one of the abovementioned issues, you can make sure you get it fixed.
However, it is a good idea to consider if your faucet is old or has several of the issues listed above; it’s more affordable to purchase an entirely new one. Older faucet components are challenging to locate, which is a reason to consider. To book a faucet repair, contact Ottawa Plumbing Service at (613) 317-1682 or via email at info@ottawaplumbingservice.com. Your kitchen faucet will get immediately repaired by one of our reliable plumbers.
