A blocked sewer line can be quite a hassle, and it isn’t always simple to determine how to resolve the issue.
Like most, you have no experience with clogged sewer lines. And even if you have some experience, clearing an entire sewer line can be a difficult job.
We’re here to assist. We’ll guide you through how to clear the sewer lines that run through your home. You’ll get some advice from us on how to prevent traffic jams in the future as well.
5 Steps to Clear & Clean Your Sewer Line Drain
After you understand several frequent reasons for sewer line obstructions, let’s examine the steps to remove and clean the primary sewer line obstruction.
Step 1: Find a Toilet or Clean-Out Access
First, locate the clean-out entrance or remove a toilet. The clean-out access is typically found at the bottom of the house or close to your home’s foundation. If you cannot locate it, you might have to remove a toilet to get access to the line for sewerage.
Please turn off the water supply to the toilet before attempting to pull it. To remove the remaining water from the toilet bowl, flush it. Remove the bolts holding the bathroom to the floor by unscrewing them next. The toilet should then get raised and placed aside.
Step 2: Clear the Drain with a Cable Auger Equipment
When you’ve gained an access point to your sewer, you must employ an auger cable to unblock the drain. Cable augers are highly long flexible cables used to eliminate obstructions in drains.
To use an auger cable, start feeding your line through the drain. After that, switch the machine and pull the cable into the gutter. As the cable travels through the drain, it will break apart any obstructions in the way.
Step 3: Utilize a Sewer Camera to Check the State of the Sewer Line
After you’ve utilized the cable drill to clean the drain, the following step would be to employ the sewer camera to check the state of your sewer line. It’s a tiny waterproof camera that gets put in the bar. The camera allows you to observe the condition of your sewer lines and any obstructions that could be in place.
Step 4: Clean Up Any Extra Debris with a Hydro Jetter Equipment
Once you have cleared the sewer line obstructions, the second step will be to employ the hydro jetting device to eliminate any other obstacles within the tube. Hydro-jetting uses high-pressure water to remove and clean out the roots, grease, and other obstructions that could cause problems in the drainage system for the sewer line.
To operate a Hydro Jetter, you must insert the pipe through the sewerage line. After that, switch up the unit and watch the fluid flow through the tube. The water at high pressure will eliminate any debris that remains out of the line.
Step 5: Find Out If Your Sewer Line Requires Repair or Not
After you’ve cleared all blockages and the sewer line, the following step will be to decide whether your sewer line requires repairs or does not need repair. Getting a professional to fix the pipe is crucial if you spot cracks or breakages in your sewer line.
The trenchless sewer line repair is a process that can reline the sewer pipe without digging it up. It is a less disruptive and cost-effective method for the repair of your line of sewer. Furthermore, plumbers fix sewer lines without needing to dig in your lawn today.
If You Cannot Remove Your Sewerline Clog, You’ll Need to Call a Plumber.
You should call a skilled plumber if you’ve tried to clean the main sewer line but are having trouble solving the problem. A professional plumber will have the equipment and expertise required to get rid of the clog and repair any damage that might be there.
If you reside in Ottawa and are looking for sewer line services like repair, cleaning, or replacement, call Ottawa Plumbing Service. The team you work with will be courteous and professional plumbers. So, if you need our services, call us at (613) 317-1682 or email us at info@ottawaplumbingservice.com to contact us today for an estimate.
