The most unpleasant feeling is to flush the toilet and realize that the toilet water isn’t going down. Are you worried that it will overflow? Do you think the toilet is getting blocked? If you observe the problem, your initial response is to begin stressing. But there’s no need to worry. Toilets that don’t flush are a frequent issue that is usually simple to fix. The most common causes of toilet blockages are listed below.
The Toilet Isn’t Flushing Correctly Because of a Problem with the Toilet Handle.
If you attempt to flush your toilet, do you notice that the handle goes down, but nothing happens? It is generally a good thing since it’s usually one of the most straightforward issues to address. In most cases, if you’re not seeing or hearing movement in the water when you push on the handle, it indicates that your toilet handle isn’t functioning correctly.
In the toilet tank, the flushing handle gets linked to a small chain and an arm that lifts the flapper. When you press the hold, the flapper in the toilet rises, and water flows to the drain. Small things such as a damaged part of a chain or loose nut could cause a disconnect in the flapper from the handle. The fix is as easy as reattaching two fundamental components.
Your Tank’s Water Level Is Too Low; Therefore, the Toilet Won’t Flush.
If there’s not sufficient water inside the tank, it will not flush since it isn’t able to dump enough water into the bowl. To determine if this is the cause of the issue, look at the side of the toilet tank. It should have water around one inch below the top of the overflow tube. In most situations, this is pretty easy to handle.
Sometimes, it’s as simple as turning the valve for flushing. If the water intake valve has been affected, it might not be receiving enough water to flush. In some instances, the cause for this may be the problem with pressure in the water pipes leaks or other issues that need assistance from a plumbing professional. In other instances, the float ball may have to get improperly adjusted, which causes it to sink below the recommended level and show that the tank gets filled before it is.
Toilet Water Will Not Stop Running Due to a Flapper or Fill Valve Issue
Is your toilet beginning to flush perfectly but then it keeps running? A bathroom running toilet can be problematic because it could cause a lot of wastewater. It can become a hassle because it makes it difficult to wash the toilet later.
Most of the time, the cause is the flapper seal has been damaged or bent. It could be necessary to replace it to fix the issue, which is an easy and quick repair. Another issue that could be a problem is the accumulation of water in the valve that fills it and prevent it from shutting off correctly.
Your Toilet Is Clogged
In most cases, it’s not the toilet in itself. It’s an obstruction in the bathroom. Toilets get designed to deal with certain types of waste and volumes. It’s not difficult to get them blocked by things such as sanitary products, a toy your child dropped into the bowl, or even a considerable amount of paper from the toilet.
You’re probably aware if you’re suffering from a toilet blockage. If you notice any issue with the toilet that isn’t going away, there’s a good chance you have an obstruction. It is possible to plunge into the bathroom or scratch it off with the Toilet brush to help get it moving. If the clog is more severe, the plumber or you might require a drill for toilets to access the bathroom and clean the toilet.
There Is a Drain Line Trouble
Everything inside your Toilet can function flawlessly, yet your toilet will not flush in any way. It indicates that the issue is in the plumbing. These drain pipes that carry the waste to your sewer or septic could be affected by various problems. If a malfunctioning drain line is a reason behind the toilet not flushing, it could be that drains are not working throughout the home. The showers, sinks, and tubs might see water leaking in the gutters, or they may all be draining slowly.
Similar to a toilet, your drain line could block. If the drainage line has become damaged or leaks, it could prevent your bathroom from being flushed. You may require an expert plumber with an extra-long drill to get out to cleanse it. Tree and other plant roots in your yard could also infringe on the drain line, necessitating the repair of the entire section.
Protect yourself from the inconvenience and expenses of plumbing issues by purchasing the assistance of Ottawa Plumbing Service. You can reach our repair line anytime if a problem arises, and we’ll send a qualified professional to assist you. Email us at info@ottawaplumbingservice.com or call at (613) 317-1682.
